Cal. No. W510
Refine your searchW510
All Reset
Resetting the watch - All Reset
When the watch does not work properly, you can reset all the settings.
If the power reserve is insufficient, charge the watch first.
The setting values after All Reset
| Time | 0:00:00AM |
|---|---|
| Calendar | January 1 of leap year, Sunday |
| Pairing information | Pairing information is not removed. |
| Connection status | Disconnection |
Resetting the watch - All Reset
- Pull the crown out to position 2.
- Press and hold the upper right button B and the lower right button A at the same time for 4 seconds or more and release them.
- Press and Press and release the lower right button A.
- Press the lower right button A to change the target to correct.
- Rotate the crown to adjust the hand/indication.
- Repeat steps 5 and 6.
- Push the crown in to position 0.
- Press and release the lower right button A to finish the procedure.
The second hand points 15 seconds.
As you release the buttons, the alarm sounds and all reset is executed.
After finishing All Reset, correct the reference position following the steps below.
Correct reference positions
Hour, minute and second hands: 0 hour 00 minute 0 second
Function hand: slot 1
Date indication: midway between “31” and “1”
This will enable you to start correcting the reference position.
!
Each time you press the lower right button A, the target changes as follows.
Function hand/date indication → hour hand → minute hand → second hand → (back to the top)
!
The hands and indications slightly move when selected to show they become adjustable.
!
The function hand and date indication move synchronously.
Date indication changes to the next as the function hand rotates 5 times.
!
When adjusting the hour hand, the second and minute hands slightly escape left and right to provide clearer view of the hour hand.
!
When you rotate the crown quickly a few times, the hand/indication will move continuously.
To stop the rapid movement, rotate the crown in either direction.
The watch keeps to indicate the reference position.
!
The hands and indication returns normal in 2 minutes without pressing the lower right button A.
Adjust the time and calendar after that.